TM3200P Membrane Press Machine

This machine can be used to paste PVC, ABS, etc film on furniture,cabinets, loudspeakers, relief doors, decoration panels for walls and other abnormal decoration shapes with a special silicon sheet.

Introduction| Specifications| Related Cases| Inquiry| Related Products

Introduction

FEATURES

♦ The electrical part is fully automatic and digitalized control,the components produced by famous enterprises with top quality.

♦ Heat transfer oil heating system and high quality heat preservation material can ensure even heating and energy saving.

♦ The integrated movement electromotor produces less noise and seldom breaks down.

♦ Adopt Germany Becker vacuum pump,wich are stable and reliable with simple maintenance work.it is quick to pump out,with lower trouble rate;it has ultra-large gas tank with double air channels to flow through,large amount of the ventilation and huge explosive force.

♦ Main components are produced by numerical control machining center to ensure its high precision.

♦ The racks are all composed of manganese steel plate,the whole frame is reasonable,can support 500 tons of pressure.

♦ The heating system adopts the heat conduction oil for heating circularly,the temperature is even,and machine has the bottom heating,can enable the product to achieve an ideal effect.

♦ Control system adopts JP Omron PLC,Operated by man-machine interface,the automation degree is high,has four working modes,can adapt for different workpieces.

♦ We promise the perfect quality,the maintains for one year,momentarily provide the technical support and the professional training.

tm3200p membrane press machine

Specifications

TECHNICAL PARAMETERS	TM3200P MEMBRANE PRESSER
- Central supply system: ≥1m³ - Vacuum pump: Germany Becker - Heater system: Oil heater system - Working Speed : 2~4 min/1 time - Table size: 3215 x1540x40 mm - Membrane pressure: 0.3~0.5mpa - Positive(+) pressure: 0.5~0.6mpa - Negative(-) pressure: 0~0.095mpa - Conducting oil pump: 0.4kw x 2set - Working size: 3000 x1320x40 mm - Total weight: 20000 kgs	- Pressure of supply system: ≥0.5m³ - Maximum processing hight: 50mm - Outside size: 17200x2200x 2530mm - Hydraulic station: Integrated System - Oil pressure: 10mpa (low press:4 top P25kw) - Total power: 52.6kw (half power after running) - Top heating: 28.8kw (half power after running) - Under heating: 18kw (half power after running) - Working Voltage : 380V/50Hz or Basis on client country - Temperature control: Temperature controller set temperature - Control system: PLC (OMRON) / LONG REMOTE CONTROL
PATENTED TECHNOLOGY AND CONFIGURATION
- Remote control - Oil heating system - Destaticizing system - Automatic pin system - Smart Database system - Auto PVC cutting system - Automatic feeding system	- Non-welding machine frame - Suitable for high glossy PVC - Automatic PVC re-clear system. - Without MEMBRANE press working model - Large table with more economical and efficient - PIN point with heat-resistant and high-strength Nylon material.

FUNCTION

- Only function 4 have to uninstall silicon,function 3 only use silicon to heating film.

- Function 1 normal and fastest. - Function 2 suitable for small part pvc.

- Function 3 best for silicon.special Function 3 model 2.- Function 4 suitable in hot place

	MODEL	SUI FILM	HEATING MODE	PRESSURE MODE	MAX PRESSURE
Function 1	Working 1	Matt finish	PVC touch silicon	Silicon press	Max 4kg/cm²
	Working 2	High glossy	PVC touch silicon	Silicon press	Max 4kg/cm²
Function 2	Working 1	High glossy	PVC no move	Silicon press	Max 4kg/cm²
	Working 2	Matt finish	PVC no move	Silicon press	Max 4kg/cm²
Function 3	Working 1	Matt finish	PVC touch silicon	Air pressure	Max 5kg/cm²
	Working 2	High glossy	PVC no move	Air pressure	Max 5kg/cm²
Function 4	Working 1	Matt finish	PVC touch top heat board	Air pressure	Max 7kg/cm²
	Working 2	High glossy	PVC no move	Air pressure	Max 7kg/cm²

Related Cases

Inquiry

If you have any suggestions or opinions about our products, please leave a message, and we will immediately answer your questions. Thanks for your support.

E-mail:neo_1121@aliyun.com Tel:+86-135 6383 8787

Taian Zhanhong Woodworking Machinery Co., Ltd.